3 - 5
3 Connecting with a Vision Sensor
Vision System FH Series Operation Manual for Sysmac Studio (Z343)
3-2 Establishing an Online Connection with a Vision
Sensor
3
3-2-1 Establishing an Online Connection from the Sensor Connection Screen
<Sensor connection screen>
Click the [Search for sensors] button of [Online] - [Sensor connection] to display a list of the IP
addresses of the FH vision sensors on the same network. Select the FH vision sensor you wish to con-
nect to and then click the [Connect] button.
You can also directly enter an IP address in the IP address field.
If you wish to connect with an FH vision sensor via a router, directly enter the IP address and then click
the [Connect] button.
To Next Page
Loading...
