Omron fh series Operation Manual

3 - 7
3 Connecting with a Vision Sensor
Vision System FH Series Operation Manual for Sysmac Studio (Z343)
3-2 Establishing an Online Connection with a Vision
Sensor
3
3-2-2 Establishing an Online Connection from the Multiview Explorer
When connecting an FH Sensor Controller whose version does not match the version registered in the
project, the following dialog appears.
However, when there is combination of connections whose version is not supported, the following dia-
log appears.
If the versions do not match, online editing cannot properly be performed and editing the data offline
cannot be performed after editing it online in some cases. Make sure to connect an FH Sensor Control-
ler whose version matches.
Precautions for Correct Use
When opening a project that contains settings for FH Sensor Controller whose version is not
supported or does not match the registered version, the following dialog appears.

Omron fh series Specifications

General

Type	Machine Vision System
Series	FH Series
Power Supply	24 VDC
Storage Temperature	-20 to 60°C
Humidity	35 to 85% RH (non-condensing)
Image Sensor	CMOS
Processing Speed	High-speed processing
Connectivity	Ethernet
I/O	Digital I/O
Operating System	Embedded OS
I/O Ports	Ethernet, USB