70
Voice Unit Voice messages can be input from dynamic microphones or cassette tape re-
corders and output from loudspeakers or headsets via the Voice Unit.
The Voice Unit incorporates a sentence function and word combination function,
either of which can be selected to record voice messages for 64 seconds maxi-
mum.
Voice can be saved on floppy disks with an IBM PC/AT or compatible.
Voice input
Voice output
Voice saving/Re-input
Microphone or cassette tape player
Headset or speaker
Personal computer, or PROM Writer
C200H-CN224 Connect-
ing Cable (2 m long with
6- and 25-pin connectors)
ID Sensor Units The ID Sensor Units are used to construct non-contact information recognition
systems.
By connecting a R/W Head or R/W Antenna to an ID Sensor Unit, data can be
written to the Data Carrier attached to each moving object and the data of the
Data Carrier can be read by the C200HS.
The following models of ID Sensor Units are available.
Electromagnetic induction model: C200H-IDS01-V1
Microwave model: C200H-IDS21
C200H-PRO27-E
Programming Console
Data Carrier
R/W Head
R/W Antenna
Special I/O Units Section 5-4
To Next Page
Loading...
Need help?
General
