Appendix AStandard Models
163
Peripheral Devices
Name Specifications Model number Standards
Programming Console Vertical, with backlight 3G2A5–PRO13–E U, C
Horizontal, with backlight 3G2A6–PRO15–E –––
Hand-held, with backlight. The Programming Console
Adapter AP003 and connecting cable CN222/CN422 are
necessary. They are sold separately.
C200H–PR027–E U, C
Programming Console
Mounting Bracket
Used to attach Hand-held Programming Console to a
panel.
C200H–ATT01 –––
Programming Console For C20P/C28P/C40P/C60P only 1 m 3G2C7–CN122 –––
Connecting Cables 50 cm 3G2C7–CN512 –––
For Hand-held Programming Console 2 m C200H–CN222 U, C
4 m C200H–CN422 U, C
Programming Console
Adapter
Used with C200H–PRO27 and C200H–CN222
3G2A5–AP003 –––
Cassette Recorder
Connecting Cable
Used to connect Programming Console, GPC, or
Cassette Deck Interface Unit to a cassette deck;
length: 1 m.
SCYPOR–PLG01 –––
PROM Writer Used for all P–type PCs. 3G2A5–PRW06 –––
Printer Interface Unit Interface for X–Y plotter or printer; System Memory
Cassette ordered separately.
3G2A5–PRT01–E –––
Memory Pack When mounting P-type CPUs C20–MP009–EV3
Printer Connecting Cable 2 m (also used for X–Y plotter) SCY–CN201 –––
Floppy Disk Interface Unit C20P/C28P/C40P. With comment file; able to connect to
NEC floppy disk controller
3G2C5–FDI03–E –––
Peripheral Interface Unit To connect GPC or FIT to P–type PCs 3G2C7–IP002–V2
Connecting Cable Used to connect FIT or GPC to 2 m 3G2A2–CN221 –––
Peripheral Interface Unit and to 5 m 3G2A5–CN523
connect Programming Console 10 m 3G2A5–CN131
Adapter and Programming Console 20 m 3G2A5–CN231
Base. 30 m 3G2A5–CN331
40 m 3G2A5–CN431
50 m 3G2A5–CN531
To Next Page
Loading...
Need help?
General
