48
Configuration of Instrumentation System Section 1-2
Note In the case of an analog output Field Terminal block, select the function block
according to the Unit model.
CJ Series
Note In data exchange above, the Loop Controller handles analog I/O signals not in
engineering units but in percentage units. For example, the data 0000 to 0F0A
(FF38 to 1068) Hex from the Analog Input Unit for input 4 to 20 mA (3.2 to
C200H Special
I/O Unit
Analog Input Unit 8 inputs (select from 1 to 5 V, 4 to 20
mA, 0 to 10 V, or −10 to 10 V), Res-
olution: 1/4000
C200H-AD003 AI 8-point Terminal
(Block Model 551)
Analog Output Unit 8 outputs (select from 1 to 5 V, 0 to
10 V, or −10 to 10 V), Resolution:
1/4000
C200H-DA003 AO 8-point Terminal
(Block Model 552)
8 outputs (4 to 20 mA), Resolution:
1/4000
C200H-DA004 AO 8-point Terminal
(Block Model 552)
Analog Input/Out-
put Unit
2 inputs (1 to 5 V, 4 to 20 mA, etc.)
2 outputs (1 to 5 V, 4 to 20 mA, etc.)
C200H-MAD01 AI 2-point/AO 2-point
Terminal (Block
Model 553)
Unit
information
Name Specification Model Function block
Name Specification Model Function block
Analog Input/Output Unit 4 inputs (1 to 5 V, 4 to 20 mA, etc.)
2 outputs (1 to 5 V, 0 to 10 mA, etc.)
CJ1W-MAD42 AI 4-point/AO 2-point Ter-
minal (Block Model 583)
Analog Input Unit 4 inputs (1 to 5 V, 4 to 20 mA, etc.) CJ1W-AD041-V1 AI 4-point Terminal
(Block Model 586)
4 inputs (1 to 5 V, 4 to 20 mA, etc.) CJ1W-AD081-V1 AI 8-point Terminal
(Block Model 584)
4 inputs (high-speed model)
(1 to 5 V, 4 to 20 mA, etc.)
CJ1W-ADG41 AI 4-point Terminal
(Block Model 581)
Analog Output Unit 4 outputs (1 to 5 V/4 to 20 mA, etc.) CJ1W-DA041 AO 4-point Terminal
(Block Model 587)
8 outputs (1 to 5 V, etc.) CJ1W-DA08V AO 8-point Terminal
(Block Model 585)
8 outputs (4 to 20 mA) CJ1W-DA08C AO 8-point Terminal
(Block Model 585)
2 outputs (1 to 5 V/4 to 20 mA, etc.) CJ1W-DA021 AO 2-point Terminal
(Block Model 591)
Isolated-type Thermocouple
Input Unit
4 inputs (B, E, J, K, L, N, R, S, T, U,
WRe5-26, PLII, mV)
CJ1W-PTS51 AI 4-point Terminal
(Block Model 566)
2 inputs (B, E, J, K, L, N, R, S, T, U,
WRe5-26, PLII)
CJ1W-PTS15 AI 2-point Terminal
(Block Model 571)
Isolated-type Temperature-
resistance Thermometer Input
Unit
4 inputs (Pt100, JPt) CJ1W-PTS52 AI 4-point Terminal
(Block Model 567)
2 inputs (Pt100, JPt100, Pt50, Ni508.4) CJ1W-PTS16 AI 2-point Terminal
(Block Model 571)
2 inputs (1 to 5 V, 4 to 20 mA) CJ1W-PDC15 AI 2-point Terminal
(Block Model 571)
Isolated-type High-resolution
Input Unit with Fully Universal
Inputs
4 inputs (K, J, T, E, L, U, N, R, S, B,
WRe5-26, PLII, Pt100 (JIS, IEC 3-
wire), JPt100 (3-wire), Pt1000 (3-wire),
Pt100 (3-wire), Pt100 (JIS, IEC 4-wire),
4 to 20 mA, 0 to 20 mA, 1 to 5 V, 0 to
1.25 V, 0 to 5 V, 0 to 10 V, ±100 mV, -
1.25 to 1.25 V, -5 to 5 V, -10 to 10 V)
CJ1W-PH41U AI 4-point Terminal
(Block Model 572)
Isolated-type General-pur-
pose Input Unit with Fully Uni-
versal Inputs
4 inputs (K, J, T, L, R, S, B, Pt100,
Pt1000, JPt100, 4 to 20 mA, 0 to
20 mA, 1 to 5 V, 0 to 5 V, 0 to 10 V))
CJ1W-AD04U AI 4-point Terminal
(Block Model 573)
To Next Page
Loading...
Need help?
General
