The settings are reflected after the Unit is restarted.
Precautions for Safe Use
If you transfer parameters for Unit operation settings that are updated when the Unit is restarted
after the settings are changed on the Support Software, the Unit will be restarted after the trans-
fer is completed. Always sufficiently check the safety at the connected devices before you
transfer the Unit operation settings.
8 Functions
8 - 7
NX-series Analog I/O Units User’s Manual for High-speed Analog Input Units (W592)
8-3 Input Range Selection
8
8-3-3 Setting Method
To Next Page
Loading...
Need help?
General
