Omron SYSMAC NX series

The settings are transferred from the Sysmac Studio to the NX Unit.
The settings are reflected immediately.
8-5-4
Checking the Digital Filter Settings
You can check the digital filter settings on the Sampling Settings and Digital Filter Settings Tab Page of
the Support Software.
Refer to Display Method on page
8 - 12 for how to display the Sampling Settings and Digital Filter Set-
tings Tab Page and
Displayed Information on page 8 - 14 for the displayed information.
8 Functions
8 - 28
NX-series Analog I/O Units User’s Manual for High-speed Analog Input Units (W592)