Omron SYSMAC NX series User Manual

3-2-3
Appearance Change of the Indicators
The appearance of the indicators has been changed for models released in or before March 2019 with
lot numbers that represent the date of or after March 20, 2019. See below for details on the applicable
models and the changes. Models that are not listed here have the appearance after the change.
Applicable Models
NX-HAD401 and NX-HAD402
Change Details

TS Indicator
The shape of the light emitting part of each indicator has been changed from a square to a penta-
gon.
See below.
Before change After change

IN Indicator
The indicators before the change have a square-shaped light-emitter on the left side of each trigger
input number, and the indicators after the change have the trigger input numbers emitting light.
Before change After change
3 Part Names and Functions
3 - 5
NX-series Analog I/O Units User’s Manual for High-speed Analog Input Units (W592)
3-2 Indicators
3
3-2-3 Appearance Change of the Indicators

Omron SYSMAC NX series Specifications

General

Brand	Omron
Model	SYSMAC NX series
Category	Controller
Language	English