Omron SYSMAC NX series User Manual

Related Manuals
The following table shows related manuals. Use these manuals for reference.
Manual name Cat. No. Model Application Description
NX-series
Analog I/O Units
User
’s Manual
for High-speed Analog In-
put Units
W592
NX-HAD
£££
Learning how to
use NX-series
High-speed Ana-
log Input Units
The hardware, setup methods, and
functions of the NX-series High-
speed Analog Input Units are de-
scribed.
NX-series
Data Reference Manual
W525
NX-££££££
Referencing lists
of the data that is
required to config-
ure systems with
NX-series Units.
Lists of the power consumptions,
weights, and other NX Unit data that
is required to configure systems
with NX-series Units are provided.
NX-series
System Units
User’s Manual
W523
NX-PD1
£££
NX-PF0£££
NX-PC0£££
NX-TBX01
Learning how to
use NX-series
System Units.
The hardware and functions of the
NX-series System Units are descri-
bed.
Sysmac Studio Version 1
Operation Manual
W504 SYSMAC
-SE2£££
Learning about
the operating pro-
cedures and func-
tions of the Sys-
mac Studio.
Describes the operating procedures
of the Sysmac Studio.
Sysmac Library User’s
Manual
for High-speed Analog In-
spection Library
W607 SYSMAC-XR016 Learning the func-
tion block specifi-
cations in the
High-speed Ana-
log Inspection Li-
brary
.
Information required to use the
High-speed Analog Inspection Li-
brary is described.
NJ/NX-series
Troubleshooting Manual
W503
NX701-££££
NX102-££££
NX1P2-££££
NJ501-££££
NJ301-££££
NJ101-££££
Learning about
the errors that
may be detected
in an NJ/NX-ser-
ies Controller
.
Concepts on managing errors that
may be detected in an NJ/NX-series
Controller and information on indi-
vidual errors are described.
NY-series
Troubleshooting Manual
W564
NY532-££££
NY512-££££
Learning about
the errors that
may be detected
in an NY
-series In-
dustrial PC.
Concepts on managing errors that
may be detected in an NY-series
Controller and information on indi-
vidual errors are described.
NX-series
EtherCAT
®
Coupler Unit
User
’
s Manual
W519
NX-ECC£££
Learning how to
use the NX-series
EtherCAT Coupler
Unit and Ether-
CAT Slave Termi-
nals.
The following items are described:
the overall system and configuration
methods of an EtherCAT Slave Ter-
minal (which consists of an NX-ser-
ies EtherCAT Coupler Unit and NX
Units), and information on hard-
ware, setup, and functions to set up,
control, and monitor NX Units
through EtherCAT.
Related Manuals
31
NX-series Analog I/O Units User’s Manual for High-speed Analog Input Units (W592)

Omron SYSMAC NX series Specifications

General

Brand	Omron
Model	SYSMAC NX series
Category	Controller
Language	English