Omron SYSMAC NX series User Manual

1-5
Support Software
The Support Software that is used depends on the system configuration.
• Support Software for a System Configured with a CPU Unit
If your system is configured by connecting an NX Unit to a CPU Unit, the Sysmac Studio is used as
the Support Software.
• Support Software for a System Configured with a Slave Terminal
If your system is configured by connecting an NX Unit to a Communications Coupler Unit, use differ-
ent Support Software depending on the connected Communications Coupler Unit. Since the High-
speed Analog Input Units can be connected only to an EtherCAT Coupler Unit, the Sysmac Studio is
used as the Support Software.
Refer to A-6 Version Information with CPU Units on page A - 51 or A-7 Version Information with Com-
munications Coupler Units on page A - 52 for information on the Support Software versions.
1 Features and System Configuration
1 - 12
NX-series Analog I/O Units User’s Manual for High-speed Analog Input Units (W592)

Omron SYSMAC NX series Specifications

General

Brand	Omron
Model	SYSMAC NX series
Category	Controller
Language	English