Omron SYSMAC NX series User Manual

8-6-3
Setting Method
This section describes how to configure settings with the Sysmac Studio.
1 Display the Edit Unit Operation Settings Tab Page.
For how to display the tab page, refer to A-8 Displaying the Edit Unit Operation Settings T
ab
Page on page
A - 54.
2 Select True (Enable) or False
(Disable) from the list of Disconnection Detection Enable/
Disable for the channel (Ch£) you want to set.
Refer to A-9 Edit Unit Operation Settings Tab Page on page A - 57 for how to edit the Unit
operation settings.
3 Click the T
ransfer to Unit Button.
The settings are transferred from the Sysmac Studio to the NX Unit.
The settings are reflected immediately
.
8 Functions
8 - 30
NX-series Analog I/O Units User’s Manual for High-speed Analog Input Units (W592)

Omron SYSMAC NX series Specifications

General

Brand	Omron
Model	SYSMAC NX series
Category	Controller
Language	English