Omron SYSMAC NX series

Event name Event Log Cleared Event code 90400000 hex
Meaning The event log was cleared.
Source Depends on where the Support
Software is connected and the
system configuration.
Source details NX Unit Detection tim-
ing
When com-
manded from
user
Error attrib-
utes
Level Information Log category Access
Recovery ---
Effects User program Continues. Operation Not affected.
System-de-
fined varia-
bles
Variable Data type Name
None --- ---
Cause and
correction
Assumed cause Correction Prevention
The event log was cleared by the
user
.
--- ---
Attached in-
formation
Attached information: Events that were cleared
• 1: The system event log was cleared.
• 2: The access event log was cleared.
Precautions/
Remarks
None
9 Troubleshooting
9 - 34
NX-series Analog I/O Units User’s Manual for High-speed Analog Input Units (W592)