Omron SYSMAC NX series - Page 269

Rec_is_Start
Recording
Started
Trig_Rdy
Trigger Input
Ready
Ch1_Trig_Input
NX Unit
I/O Data
Communications
Enabled
DataRecorder_instance
Ch1_Input_Data
Ch1_Log_Data
Ch1_Data_Buf
Ch1_Trig_Input
N2_Analog_Input_Time_Stamp
N2_Ch1_Number_of_Samplings
\\OmronLib\DataRecorder\Data
Recorder
TrigRdy
LogData
InputData
LogData
DataBuf
TrigInput
TrigMark
TrigPos
InputDataTimeStamp
InputSize
I_O_Data_
is_Valid
Ch1 Trigger Input
Trig_Rdy
Trigger Input
Ready
Enable
Start
Start
Rec_is_End
Recording
Ended
Rec_is_Start
Recording
Started
Rec_is_Start
InputData
DataBuf
Busy
RecordEnd
RecordInfo
Error
ErrorID
ErrorIDEx
Ch1_Input_Data
Ch1_Log_Data
Ch1_Data_Buf
Ch1_Rec_Info
Recording
Started
Rec_is_End
Ch1_Rec_End
Ch1_Rec_End
Ch1 Recording
Ended
Rec_is_End
Recording
Ended
Rec_is_End
Recording
Ended

Programming Example That Uses LogDataToCSV
The following shows a programming example that uses LogDataToCSV (Write Log Data to CSV
File). Assign this program to the priority-17 periodic task.
Appendices
A - 31
NX-series Analog I/O Units User’s Manual for High-speed Analog Input Units (W592)
A-4 Digital Filter Design with the Library
A
A-4-3 Programming Example