Omron SYSMAC NX series User Manual

LOT No.
Lot number and unit version Unit model number
Unit versionLot number
The following information is provided in the Unit specifications on the Unit.
Name Function
Unit model number Gives the model of the Unit.
Unit version Gives the unit version of the Unit.
Lot number Gives the lot number of the Unit.
DDMYY£: Lot number
, £
: Used by OMRON.
“M” gives the month (1 to 9: January to September, X: October, Y: November, Z:
December)
The following information is provided in the notched area on the Unit.
Name Function
Lot number and unit ver-
sion
Gives the lot number and unit version of the Unit.
• DDMYY£: Lot number, £
: Used by OMRON.
“M” gives the month (1 to 9: January to September, X: October, Y: November,
Z: December)
• 1£: Unit version
The decimal portion of the unit version is omitted. (It is provided in the Unit
specifications.)
Confirming Unit Versions with the Support Software
If your NX Unit is connected to a CPU Unit, refer to the user’s manual of the connected CPU Unit for
the confirmation method for the unit version of the NX Unit.
If your NX Unit is connected to a Communications Coupler Unit, refer to the user’s manual of the con-
nected Communications Coupler Unit for the confirmation method for the unit version of the Communi-
cations Coupler Unit and NX Unit.
Unit Versions
29
NX-series Analog I/O Units User’s Manual for High-speed Analog Input Units (W592)

Omron SYSMAC NX series Specifications

General

Brand	Omron
Model	SYSMAC NX series
Category	Controller
Language	English