Omron SYSMAC NX series User Manual

End
1-7. User Program Creation
1-8. Final Check
of Task Period/
Sampling Period
Sampling
Period Check
Yes
Is it less than 5 μs?
Are target values met?
Task Period
Setting
Sampling
Period Check
Yes
Yes
No
Return to “1-4. Unit
Operation Setting”
and decrease the
number of samplings.
Return to “1-4. Unit
Operation Setting”
and increase or
decrease the number
of samplings.
A
Is task period setting
necessary again?
No
No
Description of Each Step
The following table describes each step in the operation flow and shows where references are provid-
ed.
Step Item Description Reference
1-1 Project Creation Create a project with the Support Software. Operation manual for the Sup-
port Software that you are using
1-2 Unit Registration Register the High-speed Analog Input Unit
of
fline in the connected CPU Unit or Com-
munications Coupler Unit.
2 Specifications and Operating Procedures
2 - 6
NX-series Analog I/O Units User’s Manual for High-speed Analog Input Units (W592)

Omron SYSMAC NX series Specifications

General

Brand	Omron
Model	SYSMAC NX series
Category	Controller
Language	English