Section 4 Setting IP Addresses
Getting an IP Address from a BOOTP Server
On the Network Settings View, select the Obtain from BOOTP server Option or the Fix at the IP
address which is obtained from BOOTP server Option, and then click the Set Button.
If you use the BOOTP client, the IP addresses that are used for the following Reader/Writer functions will change
dynamically and may result in unexpected operation. Confirm that no problems will occur before you use the BOOTP
client.
• IP address of the copy destination Reader/Writer for the data copy function
• IP addresses of the Slave Reader/Writers for multi-Reader/Writer operation
To Next Page
Loading...
