Omron V680S Series - Page 71

Section 2 Using Multi-Reader/Writer Operation
Using High-speed Traveling Mode
Use the following procedure for operation in High-speed Traveling Mode. The following figure shows an
example in which four Reader/Writers are installed.
PLC
Switching Hub
Master Reader/Writer
Slave
Reader/Writer
No. 1
IP:192.168.1.200
IP:192.168.1.202
Slave
Reader/Writer No. 2
IP:192.168.1.203
Slave
Reader/Writer No. 3
IP:192.168.1.201
Direction of line
movement