1. Product Overview
1-4
1.3 Easy Power Measurement
The Portable Power Monitor displays the measured momentary power during the power
is ON.
The monitor measures electric current values, which are then multiplied by a specified
voltage and power factor (the ratio of effective power) to convert them into power values.
A long press of the SET/REC/STOP key measures and displays an integrated power
consumption.
Another long press of the SET/REC/STOP key stops recording and the integrated power
value up to that moment is displayed as a record in the ranking from the highest to
lowest integrated power values. (Ranking Function)
Up to 9 value records can be logged in the ranking. When the 10th record is added, the
lowest integrated power value is deleted.
The ranking can be cleared using the CLEAR menu item.
The integral power consumption reset function is also available, which enables the
operator to analyze the peak power by only using the monitor unit.
To Next Page
Loading...
