2. Part Name and Function
2-5
2.3 Input/Output Specifications
2.3.1 Alarm Output
(1) Alarm Output Terminals
(1) OUT
Outputs the judgment result allocated in THR mode.
(2) GND
It is a common terminal.
The terminal names are inscribed on the unit.
Use the provided alarm output connector for wiring.
(2) Output Specifications
Important
・Do not connect the external power supply directly between OUT and GND.
Note that it must be connected through a load.
・An alarm cannot be output when the measurement mode (MODE) is set to "SLEEP".
To Next Page
Loading...
