Omron ZN-CTX21 - 4.2.3 Selecting Items

4. Setting the Unit (Unit Operation)
4-6
4.2.3 Selecting Items
Move the selection items using the △ and ▽ keys. To change the set value, select the
item with △ or ▽ key and apply the selection with the SET/REC/STOP key. Press the
MODE key to change the operation mode.
When TIME is set to ON
When STRIG is set to TIME
When ETRIG is set to ELPSD
When ETRIG is set to TIME
When ETC is set to DISP
When IP is set to DISP
When CLOCK is set to DISP
When DTAIL is set to DISP