Omron ZN-CTX21 - 1.4.1 Standalone Operation

1. Product Overview
1-5
1.4 Setup and Operation Procedure
1.4.1 Standalone Operation
Check the package contents
⇒
3.1 Checking the Package Contents
Check the required items
⇒
3.2 Preparing the Required Items
Connect the sensor head, alarm output terminals and prepare the power supply
⇒
3.3 Configuring the Unit
Make settings directly on the unit
⇒
4 Setting the Unit (Unit Operation)
Install the Station Utility PC software
⇒
"Station Utility User's Manual": 1. Overview and Preparation
Record data by direct unit operation
⇒
5 Measurement and Recording (Unit Operation)
Analyze short-period recording data
⇒
"Station Utility User's Manual": 4. Momentary Value Display
Set the measurement conditions
⇒
3.5 Setting the Measurement Conditions
Analyze long-period recording data
⇒"Station Utility User's Manual": 5. Integration and Summation
Mount the product
⇒
3.7 Mounting the Unit
Attach the dedicated CT
⇒
3.8 Attaching Dedicated CT to Measurement Target