Omron ZN-CTX21 - 1.4.2 Operation via Network

1. Product Overview
1-6
1.4.2 Operation via Network
Analyze short-period recording data
⇒
"Station Utility User's Manual": 4. Momentary Value Display
Check the package contents
⇒
3.1 Checking the Package Contents
Check the required items
⇒
3.2 Preparing the Required Items
Connect the sensor head, alarm output terminals and prepare the power supply
⇒
3.3 Configuring the Unit
Connect the product to a network
⇒
3.6 Connecting to Network
Mount the product
⇒
3.7 Mounting the Unit
Install the Station Utility PC software
⇒
"Station Utility User's Manual": 1. Overview and Preparation
Set the measurement conditions
⇒
3.5 Setting the Measurement Conditions
Analyze long-period recording data
⇒
"Station Utility User's Manual": 5. Integration and Summation
Record data to PC
⇒"Station Utility User's Manual":
3. Recording to PC
Remotely record data to the unit
⇒
"Station Utility User's Manual": 2.
Remote Setting and Operation
Control from PC
Attach the dedicated CT
⇒
3.8 Attaching Dedicated CT to Measurement Target