Omron ZN-CTX21 - YEAR;MONTH;DAY;TIME Setting; Network Setting (NET); Setting IP Address (IP)

4. Setting the Unit (Unit Operation)
4-17
(23) YEAR/MONTH/DAY/TIME Setting
Specifies the year/month/day/time values.
Setting range (Numeric input):
YEAR: 2000 to 2099
MONTH:1 to 12
DAY: 1 to 31
TIME: 00:00 to 23:59
Note
The year/month/day/time settings are not possible when ETC is set to "OFF" and CLOCK
is also set to "OFF".
(24) Network Setting (NET)
Specifies if the network functions are required. However, this setting is only effective when
the measurement mode (MODE) is set to "NORM".
The range of selection (Options):
OFF/ON
Initial value: OFF
(25) Setting IP Address (IP)
Specifies if the IP address setting is required.
The range of selection (Options):
OFF / DISP
Initial value: OFF
Setting Value
Operation
OFF
IP address settings are not available.
The D TA I L item is displayed when the ▽ key is pressed after the
setting is applied with the SET/REC/STOP key.
DISP
IP address settings are available.
The IP 1 item is displayed when the ▽ key is pressed after the
setting is applied with the SET/REC/STOP key.
Note
・The IP setting is not possible when ETC is set to "OFF".
・The IP setting returns to "OFF" when the unit is reset.