Omron ZN-CTX21 - 5. Measurement and Recording (Unit Operation); 5.1 Overview; 5.2 Selecting Operation Mode

5. Measurement and Recording (Unit Operation)
5-1
5. Measurement and Recording (Unit Operation)
5.1 Overview
Measured values can be recorded in two ways: recording in Portable Power Monitor units or
in the PC via network. This chapter explains recording in Portable Power Monitor units.
5.2 Selecting Operation Mode
RUN mode must be entered for power measurement.
Press the MODE key to change the operation mode to "RUN". "RUN" at the bottom right of
the display turns ON.
Note
A shift to other mode is prohibited during recording.
RUN Mode
FUN Mode THR Mode
MODE Key
Twice
MODE Key
MODE Key
△
/
▽
Key
△
/
▽
Key
△
/
▽
Key
RUN Mode
Operation
FUN Mode
Operation
THR Mode
Operation