Omron ZN-CTX21 - Setting ETC and IP to DISP

3. Check and Preparation
3-11
(2) Setting ETC and IP to “DISP”
Display
(Upper/Lower)
Operation
CLEAR
10s
("FUN" Blinking)
Press the
▽
or
△
key until "ETC" appears at the upper row on
the display.
↓
▽
or
△
Key
ETC
OFF
Press the SET/REC/STOP key. "OFF" at the lower row starts
blinking.
↓SET/REC/STOP Key
ETC
OFF
↑
Blinking
Press the
▽
or
△
key to display "DISP".
↓
▽or △ Key
ETC
DISP
↑
Blinking
Press the SET/REC/STOP key to apply "DSIP". Blinking stops.
↓SET/REC/STOP Key
ETC
DISP
Press the
▽
or
△
key to display "IP" at the upper row.
↓
▽or △ Key
IP
OFF
Press the SET/REC/STOP key. "OFF" at the lower row starts
blinking.
↓SET/REC/STOP Key
IP
OFF
↑
Blinking
Press the
▽
or
△
key to display "DISP".
↓
▽
or
△
Key
IP
DISP
↑
Blinking
Press the SET/REC/STOP key to apply "DISP". Blinking stops.
↓SET/REC/STOP Key
IP
DISP
Proceed to the IP address setting procedure.