Appendix
Appendix-1
Appendix
Error Display List
Description Troubleshooting
DATA
E11 00
writing failure
Failed to write recorded data to the SD memory card due
to no free space or the card being removed during
writing. Insert a write-enabled SD card.
Hold the MODE key for 3 seconds or more to cancel the
NO SD
E3000
No SD memory
card inserted
An SD memory card is not inserted. Insert a
write-enabled SD card.
Hold the MODE key for 3 seconds or more to cancel the
BATLO
E3001
memory card
The SD memory card cannot be accessed due to the
battery voltage drop. Replace the batteries or connect to
the AC adapter.
Hold the MODE key for 3 seconds or more to cancel the
SDLCK
E3002
Write-protected
card
The SD memory card is write-protected. Replace it with
a write-enabled one.
Hold the MODE key for 3 seconds or more to cancel the
SD ER
E3003
card recognition
error
Failed to recognize the SD memory card. Insert a normal
SD memory card.
Hold the MODE key for 3 seconds or more to cancel the
RESTR
E5000
file data
The setting data in the SD memory card is invalid e.g. an
invalid model type or setting values.
Hold the MODE key for 3 seconds or more to cancel the
BCKUP
E5001
writing failure
Failed to write setting files to the SD memory card due to
no free space or the card being write-protected. Insert a
write-enabled SD card.
Hold the MODE key for 3 seconds or more to cancel the
RESTR
E5002
reading failure
There is no setting files contained in the SD memory
card. Replace it with an SD memory card with setting
files.
Hold the MODE key for 3 seconds or more to cancel the
HARD
E****
Hardware error
There may be a failure on the hardware. Please contact
the distributor or OMRON representative office. The
displayed error code is required for identifying the
problem.
To Next Page
Loading...
