Omron ZN-CTX21 - Changing Numeric Input Type Item Value (Example: YEAR)

4. Setting the Unit (Unit Operation)
4-22
(2) Changing Numeric Input Type Item Value (Example: YEAR)
Press the MODE key several times to enter FUN mode, and press the ▽ or △ key to
display YEAR.
To display YEAR, ETC and TIME must have been set to DISP beforehand.
Display
(Upper/Lower)
Operation
CYCLE
10s
("FUN" Blinking)
Press the MODE key repeatedly until "FUN" starts blinking.
"CYCLE" is displayed at the upper row.
Press the ▽ or △
key to display YEAR. To display YEAR, ETC
and TIME must be set to DISP.
▽ or △ Key
↓
Display
(Upper/Lower)
Operation
YEAR
2010
Press the SET/REC/STOP key, then, the last digit number at the
lower row starts blinking.
SET/REC/STOP Key↓
Display
(Upper/Lower)
Operation
YEAR
2010
↑Blinking
The value increases or decreases at a press of the
△
or
▽
ke y.
The amount of increase/decrease becomes larger by holding △ or
▽ key.
To cancel the setting attempt, press the MODE key.
▽ or △ Key
↓
Display
(Upper/Lower)
Operation
YEAR
2011
↑
Blinking
Press the
△
or
▽
key to display the desired value, and press the
SET/REC/STOP key.
The value is applied and the blinking stops.
SET/REC/STOP Key↓
Display
(Upper/Lower)
Operation
YEAR
2011
Use the △ or ▽ key again to display other setting item and MODE key to change the
operation mode.