Omron ZN-CTX21 - Page 78

5. Measurement and Recording (Unit Operation)
5-3
Upper: Displays the rate/CO
2
conversion value.
Lower: Shows the unit of the rate/CO
2
conversion value.
The unit shows the integrated power ranking from the highest to lowest value for
individual intervals specified by the INTEG setting.
The display starts from the 1st rank.
Upper: Displays the ranking.
Lower: Displays the integrated power of the rank displayed at the upper row.
Continuously displays the ranking information.
Upper: Displays the ranking.
Lower: Alternately displays the integrated power measurement start date and start time
pertaining to the ranking shown at the upper row.
Continuously displays the ranking information.
Upper: Displays the "AVE", "MAX" and "MIN" indications repeatedly.
Lower: Repeatedly shows the average (AVE), maximum (MAX) and minimum (MIN)
integrated power values.
Similarly, the succe
eding ranks up to the 9th and their information are
sequentially displayed.
Upper: Displays the integrated power from the measurement start.
Lower: Displays the upper limit threshold value.
Upper: Displays the integral power.
Lower: Displays the threshold rate (Integrated Power ÷Threshold).
Rate/CO
2
Conversion Value
Unit
Ranking
Start Date
Ranking
Start Time
Integrated Power
Threshold Value
AVE
Ave. Momentary Power
MAX
Max. Momentary Power
MIN
Min. Momentary Power
・・・
Ranking
Integrated Power
Ranking Display
Integrated Power
Threshold Rate