EasyManuals Logo

Ondal ACROBAT 2000 User Manual

Default Icon
Go to English
108 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #61 background imageLoading...
Page #61 background image
63
GB
1505093, Edition 2012-05, Version 5
1 Important Information for Safe Use
1 1.4 Notes for the operator
Although the appliance has been designed according to the state of the art and is safe
to operate, the appliance must be considered a potential source of danger, in partic-
ular when operated by insufficiently trained personnel or used improperly and not as
prescribed.
The appliance may only be operated, cleaned and disinfected by trained qualified per-
sonnel.
All the mounting, dismantling and adjustment work described in these Operating
Instructions may only be carried out by qualified personnel which have been autho-
rised and instructed by the operator.
For safety reasons, any operator actions or interventions exceeding this scope may
only be carried out by Ondal or companies authorised by Ondal. As a prerequisite for
the authorisation of a company, its service technicians must have successfully par-
ticipated in technical training organised by Ondal. This authorisation is granted for a
limited period.
1.4.1 Initial commissioning
Validity These Operating Instructions only apply after initial commissioning has been carried
out properly.
Prior to initial use, the appliance must be thoroughly cleaned and disinfected.
The instruction for the proper installation of the appliance is included in the Installation
Instructions applicable for the appliance.
1.4.2 Availability of these Operating Instructions
Duty to inform Since these Operating Instructions are an integral part of the appliance, they must
always be kept near the appliance in order to be able to look up safety instructions and
important information on use at any time.
Do not pass on the appliance to any third party without valid Operating Instructions.
Based on the ID and version numbers, make sure that you hand over an up-to-date
and valid version of the Operating Instructions together with the appliance.
1.4.3 Warranty
The warranty of Ondal for the safety and operational reliability of the appliance is subject
to the following conditions:
The appliance is used exclusively as prescribed and operated as specified in these
Operating Instructions.
Only genuine spare parts or accessories and those defined and approved by Ondal
Medical Systems GmbH are used. The use of other parts may involve unknown risks
and must be avoided in all cases.
No structural alterations are made to the appliance. Unauthorised modifications or
conversions of the appliance are not permitted for safety reasons.
Inspections and maintenance must be carried out at the specified time intervals.
Initial commissioning has been carried out, and the appliance has been released for
operation by means of a declaration of acceptance.

Table of Contents

Other manuals for Ondal ACROBAT 2000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ondal ACROBAT 2000 and is the answer not in the manual?

Ondal ACROBAT 2000 Specifications

General IconGeneral
BrandOndal
ModelACROBAT 2000
CategoryMedical Equipment
LanguageEnglish

Related product manuals