EasyManuals Logo

Ondal ACROBAT 2000 User Manual

Default Icon
Go to English
108 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #76 background imageLoading...
Page #76 background image
78
1505093, Edition 2012-05, Version 5
GB
6 Cleaning and Disinfection
6.1 General safety instructions
Electric shock hazard
The appliances can carry an electric current and must be treated with the
utmost care during cleaning and disinfection.
If a mains plug exists, pull the mains plug.
Do not apply spray cleaning and/or spray disinfection.
Do not spray liquid into power sockets, gas sockets or appliance open-
ings and prevent the penetration of liquids.
6.2 Cleaning
Follow the safety instructions
1. Follow the general safety instructions prescribed in
“Chapter 6.1
.
Cleaning agents Recommended cleaning agents
Use a mild soap solution or a regular dishwashing product.
2. Wipe the surfaces of the appliances with a moderately moist cloth; add a mild soap
solution (dishwashing product) if required.
3. Afterwards, carefully wipe the surfaces dry with a clean cloth.
6.3 Disinfection
Follow the safety instructions
1. Follow the general safety instructions prescribed in
“Chapter 6.1
.
Disinfection method Wiping disinfection is the standardised disinfection method prescribed for the pendant
system. Hygiene regulations and related safety instructions for the disinfection methods to
be applied must be defined by the operator.
In case of contamination with potentially infectious material (e.g. blood, body secre-
tion or excrement) the surfaces must be immediately and specifically disinfected.
Make sure that you apply the disinfectant in the correct concentration.
For surface disinfection do not spray, but wipe, the surfaces.
Wiped surfaced may only be used after the disinfectant has dried.
The appliance is not suitable for sterilisation
Avoid damage
Make sure that no liquid penetrates the appliance whilst cleaning it.
To prevent damage to plastic parts, refrain from using abrasives or alka-
line, acidic or corrosive cleaning agents.
Do not use bleaching agents on stainless steel parts.
Use trained technical specialists only and abide by national regulations.
Cleaning/disinfection must be carried out by trained technical specialists
only. The requirements of the national hygiene and disinfection committee
must be complied with.
1WARNING
1WARNING

Table of Contents

Other manuals for Ondal ACROBAT 2000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ondal ACROBAT 2000 and is the answer not in the manual?

Ondal ACROBAT 2000 Specifications

General IconGeneral
BrandOndal
ModelACROBAT 2000
CategoryMedical Equipment
LanguageEnglish

Related product manuals