Onicon F-4300 - Page 28

F
-
4300 CLAMP
-
ON ULTRASONIC FLOW METER
ONICON Incorporated 727.447.6140 Page 28 onicon.com
When installing the transducer, do not allow
the bottom face to touch the pipe surface
until it is fully inserted to the bracket
15. 
it butts against the mounting bracket. The clamping bracket can be retracted such that the transducer can be directly

3.3.3.3 One (1) Cross Mounting Installation for 20 Series Transducer (Continued)
16. 

installation easier.
17. 
brackets while transducers are installed inside them, then re-tightening the screws when done.
Separation Distance
Transducer
Transducer