Onicon F-4300 - Installation Procedures

F
-
4300 CLAMP
-
ON ULTRASONIC FLOW METER
ONICON Incorporated 727.447.6140 Page 11 onicon.com
SECTION 3.0 INSTALLATION
3.1 OVERVIEW

are mounted (clamped) on to the outside wall of the pipe. Triaxial cables convey the transducer signals to the wall mount
enclosure containing the signal processing circuitry and the user interface display.
1
2
PIPE
3
4
1. Transducer
2. Alignment and spacer tool
3. 
4. Transducer mounting bracket



transducer operating mode and the spacing between the transducers.