Onicon F-4300 - Programming Menu Configuration

F
-
4300 CLAMP
-
ON ULTRASONIC FLOW METER
ONICON Incorporated 727.447.6140 Page 46 onicon.com
4.5 PROGRAMMING MENU PAGES



For list selection options, press the at any option to select it, and the or to change the selection.
    
values, and then or to change the value selected. Press to accept the change.
Units/Mode Menu Page



Mode –

Linear 
Options: in (inches), ft (feet), m (meters) or mm (millimeters)
Volume –

Velocity –

Flow – 


Temperature –

--Units/Mode--------
 Mode Flow
Linear in
Volume USG
Multiplier x1
Decimals 0
Velocity ft/s
Flow USG/m
Decimals 2
Temperature F