Onicon F-4300 - Page 63

F
-
4300 CLAMP
-
ON ULTRASONIC FLOW METER
ONICON Incorporated 727.447.6140 Page 63 onicon.com

Home
Port1 – Not used.
Network – This page allows you to change the IP address settings.
Filter – Not used.
Monitor – Not used.
Password – This page can be used to change the password from the default admin.
Logout
Press the Network button to arrive at the following page:

Address Type

Update Settings

your PC’s IP setting page and change the IP address and subnet to match the network the F-4300 is set for.

6.2.1 IP Address Setting (IPv4) (Continued)

