Onkyo NC-500

26
Understanding the basic operations
before using the NC-500
Connecting the power cord
Plug the power cord into wall socket.
Turning on the power
When the power cord is connected, the display
shown below appears.
NC-500 Remote controller
Selecting your desired source
You can press the AUDIO INPUT button to
switch among the available input sources as
follows:
FM → AM → AUX → SERVER → iNet Radio
STANDBY / ON
(FM)
AUDIO
INPUT
(iNet Radio)
(Server)
(externally
connected
audio device)
(AM)
You can also switch among the input sources
using the selector on the remote controller.
MUSIC SERVER ......... Net-Tune server
iNet Radio..................... Internet radio
TUNER ......................... FM/AM tuner.
The button toggles
between FM and AM.
AUX ............................. External input
Press the STANDBY/ON button on the NC-500
or remote controller to turn on the power.