Onkyo NC-500 - Specifications; Amplifier Section Specifications; Tuner Section Specifications

72
Specifications
Amplifier Section
Power output
FTC 15 watts per channel, min RMS, at 8 ohms,
both channels driven 1 kHz, with no more
than 0.1%
DIN 2 × 17 watts at 6 Ω, 1 kHz
2 × 15 watts at 8 Ω, 1 kHz
Dynamic power output
2 × 27 watts at 6 Ω
2 × 24 watts at 8 Ω
Total harmonic distortion
0.1% at rated power
IM distortion
0.6% at rated power
Damping factor
30 at 8 Ω
Input Sensitivity and Impedance
TAPE/MD PLAY: 150 mV, 50 kΩ
LINE IN: 150 mV, 50 kΩ
Frequency and response
10 to 50,000 Hz +0 /–3 dB
Signal to noise ratio
100 dB (IHF-A)
Muting
–60 dB
Tuner Section
Tuning range
FM: 87.50–108.00 MHz (100 kHz steps)
(U.S. & Canadian models)
87.5–108.00 MHz (50 kHz steps)
(Other area models)
AM: 530–1710 kHz (10 kHz steps)
(U.S. & Canadian models)
522–1611 kHz (9 kHz steps)
(Other area models)
Usable sensitivity
FM: Mono 11.2 dBf,
1.0 µV (75 Ω IHF)
0.9 µV (75 Ω DIN)
Stereo 17.2 dBf,
2.0 µV (75 Ω IHF)
23.0 µV (75 Ω DIN)
AM: 30 µV
50 dB Quieting sensitivity
FM: Mono 17.2 dBf, 2.0 µV (75 Ω)
Stereo 37.2 dBf, 20.0 µV (75 Ω)
Capture ratio
FM: 2.0 dB
Image rejection ratio
FM: 40 dB (U.S. & Canadian models)
85 dB (Other area models)
AM: 40 dB
IF rejection ratio
FM: 90 dB
AM: 40 dB
Signal to noise ratio
FM: Mono 73 dB, IHF
Stereo 67 dB, IHF
AM: 40 dB
Selectivity
FM: 50 dB DIN
(±300 kHz at 40 kHz Devi.)
AM Suppression Ratio
50 dB
Harmonic distortion
FM: Mono 0.2%
Stereo 0.3%
AM: 0.7 %
Frequency response
FM: 30–15,000 Hz (±1.5 dB)
Stereo separation
FM: 45 dB at 1,000 Hz
30 dB at 100 to 10,000 Hz
Stereo threshold
FM: 17.2 dBf, 2.0 µV (75 Ω)