Onkyo NC-500 - Setting the Brightness in Standby Mode

64
Configuring Various Settings
Setting the Brightness in Standby
Mode
You can change the brightness in the display
while the NC-500 is in the standby mode.
1. Activate menu mode.
Press the SETUP button to display the setup
items in the display area.
2. Select the System setting menu.
Press the Cursor
/ button repeatedly to
display “System” in the display area.
You are presented with the following menu
items in this order: Clock, Server, iNet Radio,
FM Radio, AM Radio and System.
Press the SELECT button.
3. Press the Cursor / button to display
“Display Standby” in the display area.
Press the SELET button.
NC-500 Remote controller
SETUP
4. Press the Cursor / button to select
your desired brightness setting.
Bright: bright
Dim: dimmed
Off: turned off
Press the SELECT button to save the change.
To return to normal display, press the SETUP
button.