Onkyo NC-500

Other Information
65
Configuring Various Settings
Changing the On Screen Display
Background Color
You can change the On Screen Display
background color. If you use multiple NC-500s, it
is easier to identify each NC-500 by using
different colors.
1. Activate menu mode.
Press the SETUP button to display the setup
items in the display area.
2. Select the System setting menu.
Press the Cursor / button repeatedly to
display “System” in the display area.
You are presented with the following menu
items in this order: Clock, Server, iNet Radio,
FM Radio, AM Radio and System.
Press the SELECT button.
3. Press the Cursor / button to display
“On Screen Display” in the display
area.
Press the SELECT button.
NC-500 Remote controller
SETUP
• Changing the background color
Press the Cursor / button to display
“Background Color.”
Press the SELECT button.
Press the Cursor
/ button to select your
favorite color.
You can choose a background color from
seven colors: Blue 1, Blue 2, Green 1, Green
2, Magenta, Red 1, or Red 2.
Press the SELECT button to confirm the new
setting.
• Setting the duration before the screen
saver activates
Press the Cursor
/ button to display
“Screen Saver.”
Press the SELECT button.
Press the Cursor
/ button to select the
desired duration.
You can choose from the following duration
setting: “Off” or 1-60 minutes (in minutes).
Press the SELECT button to confirm the new
setting.
To return to normal display, press the SETUP
button.