Other Information
43
Listening to a preset station
1. Set the input selector to FM Radio or
AM Radio
Press the AUDIO INPUT button repeatedly
to display “FM Radio” or “AM Radio”.
When using the remote controller, press the
TUNER button repeatedly to switch between
“FM Radio” and “AM Radio”.
2. Press the DISPLAY button to switch to
browse mode.
3. Select the preset number of your
desired station using the Cursor
/
button.
(Up/Down arrows appear on the left side of
the display.)
With the remote controller, you can use the
Preset Up/Down feature to directly select
your desired preset number without having to
change the display mode.
Listening to Radio Broadcasts
NC-500 Remote controller
DISPLAY
Preset Up/Down
Switching among display modes
The display changes each time you press the
DISPLAY button.
Switching between FM Auto and FM
Mono modes
When you are receiving FM broadcasts, you can
switch between Auto and Mono modes:
1. Activate menu mode.
Press the SETUP button to display the setup
items in the display area.
2. Press the Cursor / button to display “FM
Radio” in the display area.
You are presented with the following menu
items in this order: Clock, Server, iNet Radio,
FM Radio, AM Radio, and System.
To Next Page
Loading...
Need help?
General
