Other Information
31
Installing the Net-Tune Central Software
Before Installing Net-Tune Central
1. Check the network adapter:
Open “System” from Control Panel, and then
open “Device Manager.”
Check the “Network adapter” item to see that
your network adapter is up and running.
If your network adapter is not listed or it is not
correctly functioning, reinstall the network
interface card or the correct device driver.
2. Check the TCP/IP protocol settings:
Net-Tune Central communicates with a
receiver using the TCP/IP protocol.
Open “Network” from Control Panel, and
make sure that the TCP/IP protocol is
installed and correctly configured.
To Next Page
Loading...
