Opel COMBO - Operation conditions; Updating data

238 Driving and operating
Providing the speed limit information
involves the following systems,
depending on version:
● camera at the top of the
windscreen
● vehicle's integrated navigation
system
● telematics service
If travelling on a road with no speed
restrictions, e.g., on German
motorways, the following sign is
displayed:
If no speed limit information can be
provided, the following sign is
displayed:
If a new speed limit is provided, a
confirmation chime is given. The
confirmation chime can be activated /
deactivated in the vehicle
personalisation 3 114.
If driving at a speed of at least
20 km/h and exceeding the speed
limit, the speed limit displayed in the
Driver Information Centre flashes
after some time and an audible signal
is given after some time. Time of
occurrence varies. Both flashing and
audible signal are terminated after a
few seconds. Due to legal
requirements, the audible signal can
only be deactivated in the vehicle
personalisation until the next time the
ignition is switched on. If the audible
signal is deactivated, 4 illuminates
for a few seconds.
In case of a failure, 4 illuminates
permanently. Consult a workshop.
Speed limiter 3 209.
Cruise control 3 207.
Adaptive cruise control 3 211.
Operation conditions
To provide country-specific speed
limit information, the vehicle needs to
identify the country it is currently in. If
a corresponding country list is
available in the Info Display, the
respective country has to be selected
manually. Otherwise, the country is
automatically selected.
To get valid speed limit information,
the vehicle's current position is sent
via the telematics unit and is
immediately deleted after processing.
Tracking of the vehicle position is not
possible at any time.
This is not impacted by the privacy
settings of Opel Connect.
Note
It is possible to report a permanent
speed limit misinformation on our
website.
Updating data
To maintain the performance of the
system, the vehicle software and the
navigation map should be updated in
periodical intervals.