Driving and operating 251
Once charging, the vehicle plug will
be locked to the charging port and
cannot be disconnected while
charging is active. - indicator
illuminates.
Charging types 3 245.
Cancelling the charging process
Note
At public charging stations, the
cancelling and subsequent
resuming of the charging process
may cause additional costs.
Once the charging process has
started, only the driver's door can be
unlocked without cancelling the
charging process. Therefore,
activate the driver's door only
function in the vehicle
personalisation.
Press < on the remote control to
cancel the charging process at any
time.
Press < twice to cancel the charging
process at any time if the function
driver's door only is activated in the
vehicle personalisation.
Central locking system 3 9.
Vehicle personalisation 3 114.
Stop charging
The high voltage battery is fully
charged if the status indicator on the
charging port permanently illuminates
green.
1. Unlock the vehicle before
removing the vehicle plug from
the charging port.
If the vehicle is already unlocked,
lock the vehicle and unlock it
again.
2. Disconnect the vehicle plug of the
charging cable from the charging
port within 30 seconds after
unlocking.
3. Close the charging port flap by
pressing firmly in the centre to
latch properly.
4. Disconnect the charging cable
from the external power source.
5. If necessary, store the charging
cable in the load compartment.
While the charging cable is plugged
into the vehicle, the vehicle cannot be
driven.
Programmable charging
By default, charging starts as soon as
the charging cable is connected to the
charging port of the vehicle. It is also
possible to schedule charging using
the Info Display.
Programmable charging is only
possible when charging at a domestic
electrical outlet / Green'Up socket or
a wall box.
Programmable charging is also
available via the MyOpel App.
To Next Page
Loading...
