250 Driving and operating
Have a qualified electrician check
the electrical installation to be
used. The installation has to be in
compliance with national
standards and compatible with the
vehicle.
When using a dedicated domestic
electrical outlet, have it installed
by a qualified electrician.
Make sure that the electrical
outlet, the plug and the cable do
not support the weight of the
control box.
1. Shift into P and switch off the
vehicle.
2. Push the charging port flap to
release it.
3. If necessary, take the charging
cable out of the load
compartment.
4. If necessary, plug in the plug of
the charging cable into the
corresponding port of the external
power source.
Charging cable 3 253.
5. Plug in the vehicle plug of the
charging cable into the charging
port of the vehicle.
Charging status 3 253.
The start of charging is indicated
by the green flashing of the status
indicator at the charging port and
at the control box of the charging
cable if available.
To Next Page
Loading...
