126 The Information Company
additional features are used, TX1 behaves the same as Basic mode except for minor
changes to log text.
Per Search Include/Exclude switches
In Basic Logical Imaging Setup mode, all searches either include files or all searches
exclude files. With Advanced Logical Imaging Setup, this can optionally be modified on
a per search basis. This allows setup of complicated logical image jobs that specify
searches in precedence over other searches and over file/folder selection. Note that this
mode can be convoluted and confusing from a search logic perspective, which is why the
Basic search mode is used as the default.
Whether or not to include or exclude a given file/folder is determined by going down the
list of searches first. If a given search matches the file/folder, that file/folder is included or
excluded based upon the setting for that search. The earlier search always takes
precedence in this way.
If no search matches a file/folder, then whether that particular file/folder is included or
excluded is decided by the manual selection of files and folders.
• Define what to include – all files and folders not matching Include searches and not
manually selected are not included.
• Define what to exclude – all files and folders not matching Exclude searches and not
manually selected are included.
Note that new searches will use the top level include/exclude setting by default.
Invert switches for individual search parameters
In Advanced Logical Imaging Setup mode, each search parameter has an invert
toggle. This lets the parameter match the opposite set of files from what it normally
matches for that parameter.
For example, if you create a search that matches Archives and File Sizes in Range 1
MB to 100 MB, two switches will appear next to those two settings. If you enable the
invert switch next to Archives, the rule now matches any file that is not an Archive. If you
enable the switch next to the File Sizes range, the rule will now match any file outside the
range 1MB to 100MB. You can switch one or both conditions to match the kind of files
you are searching for.
In general, Basic search mode is recommended unless there is a compelling reason to
switch to Advanced Logical Imaging Setup mode to target specific source evidence.
Copyright © 2022 Open Text. All rights reserved. Trademarks owned by Open Text.
To Next Page
Loading...