22 The Information Company
3.2.2 Network settings
Tap Network Settings to display the Network Settings page.
The Netw
ork Settings screen displays network related information and the current
connection status in the top area, followed by a Configuration area for setting the IP
address, MTU (maximum transmission unit) value, and custom hostname. Following the
network configuration area are areas for 802.1X configuration, and an HTTPS certificate
area.
Note that, for static IP address assignments, the DNS address and Domain fields can be
entered to make mounting CIFS shares easier.
The default MTU value is 1500, but if your TX1 is attached to a network that supports
jumbo frames, change the MTU value to 9000, which may enable much faster network
transfer speeds.
Note: Maximum allowed MTU settings exist for the various standard network link speeds.
Attempting to manually set the MTU in the Configuration area of this screen to a value
that exceeds the maximum allowed link speed MTU will result in no change to the actual
setting. This prevents slow network performance due to mismatched MTU settings.
Copyright © 2022 Open Text. All rights reserved. Trademarks owned by Open Text.
To Next Page
Loading...