OpenText Tableau Forensic TX1 Imager
The Information Company 145
In the Drive Utilization area, if the drive has one or more filesystems, tap the Entire
drive menu to display a list of filesystems.
Select
a filesystem to display In use and Free utilization information. Note that changing
this selection from Entire drive to one of the detected filesystems only changes the
utilization information displayed in this specific sub-area of this screen. All other
information on this screen reflects the entire drive, and the media utilities below will act
on the entire drive.
Note: All the information in the section above also pertains to the USB Accessory drives.
The USB Accessory button only appears in the bottom section of the Home screen when
a USB Accessory drive is connected and detected by TX1.
To help users identify which source drives have already been acquired, a green
checkmark is shown in the bottom right portion of the drive tile for any drives that have
been used in a previous, successful duplication job (clone or image), even in cases of a
disconnected or reconnected drive. For active (incomplete) duplication jobs, a hollow
checkmark will appear which will turn green once the job has successfully completed.
While this acquisition indication method is useful in general, it was added with the advent
of automated acquisition as a means of helping users keep track of which drives have
been acquired in the fast-paced environment that happens when jobs are automatically
Copyright © 2022 Open Text. All rights reserved. Trademarks owned by Open Text.
To Next Page
Loading...