160 The Information Company
4.10.2.2 Log 2
-------------------------Start of TX1 Log Entry-------------------------
*** CAUTION: THE OPERATION RECORDED IN THIS LOG DID NOT COMPLETE NORMALLY
Task: Image Readback Verification
Status: Error/Failed
Created: Thu Apr 7 11:27:59 2022 (UTC-0500)
Started: Thu Apr 7 11:27:59 2022 (UTC-0500)
Failed: Thu Apr 7 11:28:26 2022 (UTC-0500)
Destination unreadable - 0xfb1ecc28838d027a
Closed: Thu Apr 7 11:28:26 2022 (UTC-0500)
Elapsed: 27 sec
Username: User1
Examiner: Hawkshaw
Case ID:
537 ONN
Case Notes:
Zuse Z3
Imager App: TX1
Imager Ver: 22.1.1
TX1 S/N: 000ecc58010012
---------------------------Image Destination----------------------------
Interface: SATA
Port: SATA/SAS 2
Model: ATA ST3000DM001-1CH166
Firmware revision: CC43
Serial number: S1F0WNPD
SCSI LUN: 0
Capacity in bytes: 3,000,592,982,016 (3.0 TB)
Block Size: 512 bytes
Block Count: 5,860,533,168
Partition table: GPT
Partition 1
Start Sector: 2,048
Sector Count: 5,860,530,176
Partition Encryption: None detected
Filesystem (Target Filesystem)
Type: NTFS
Block Size: 4,096 bytes
Total Blocks: 732,566,271
Free Blocks: 728,812,825
Total bytes: 3,000,591,446,016 (3.0 TB)
In Use bytes: 15,374,114,816 (15.3 GB)
ATA-specific info
Power-ON Block Count: 5,860,533,168
HPA Block Count: 5,860,533,168
DCO Block Count: 5,860,533,168
Supports AMA: No
Tableau Encrypted: No
Whole disk encryption: None detected
Folder: /tx1_images/2022_04_07_11_09_56/
File name base: image
File format: Ex01
----------------------------Failure Summary-----------------------------
Reason for failure: Destination unreadable
Failure code: 0xfb1ecc28838d027a
--------------------------End of TX1 Log Entry--------------------------
Copyright © 2022 Open Text. All rights reserved. Trademarks owned by Open Text.