26 The Information Company
Tap Save to show the selected EAP type and status in the settings summary.
Aft
er saving the selected EAP type and Phase two internal protocol settings, a yellow
icon appears in the right side of the top navigation bar, and an Add Password button
becomes active in the settings summary area. Tap the navigation bar icon or Add
Password to enter an 802.1X passphrase/password. Tap Submit to begin the
authentication procedure.
Upon successful authentication the network lock icon will disappear and status in the
settings summary will report Authenticated.
Copyright © 2022 Open Text. All rights reserved. Trademarks owned by Open Text.
To Next Page
Loading...