OpenText Tableau Forensic TX1 Imager
The Information Company 45
conformant Sanitize commands. The Purge option is disabled if the Sanitize command is
not supported by the drive.
The screenshots below show examples of NIST Clear and NIST Purge compliant drive
wipe setups.
The following flowchart depicts how TX1 determines wipe setting conformity to NIST 800-
88 r1. Note that this flowchart reflects handling of drives with no HPA/DCO/AMA settings.
Copyright © 2022 Open Text. All rights reserved. Trademarks owned by Open Text.
To Next Page
Loading...