OpenText Tableau Forensic TX1 Imager
The Information Company 83
2. Enter the IP address of the iSCSI server by tapping on the Address field. If needed,
change the default iSCSI Port from 3260 to the port used by the iSCSI server. If
needed, enter a Discovery Username and Discovery Password.
Note: Throughout the TX1 user interface, passwords can be shown as either plain
text or hidden. Simply tap the eye icon to the right of the entry field to toggle the
display mode.
Copyright © 2022 Open Text. All rights reserved. Trademarks owned by Open Text.
To Next Page
Loading...